So, you want to be the next Paul Rodriguez or Rob Dyrdek? You want to cruise the streets or skate park with style and ease, shredding with the best of them? Well, it all starts with buying your first complete skateboard and – more importantly – buying the correct set up for you. evo is here to help you through the process. 

 
Content and Parts List


To create a complete skateboard these are the necessary components:
  • Skateboard Deck
  • A set of trucks (2)
  • A set of wheels (4)
  • A set of beraings (2 per Wheel or 8 Total)
  • Hardware (a set of 8 nut and bolt combinations necessary to attach trucks to board)
  • Grip Tape(Sand-paper like material on top of skateboard to increase grip)
Optional component:
  • Riser Pads depending on diameter of wheel (1 per Truck, 2 Total)
 
Skate Decks
 
The skateboard deck refers to the actual board platform on which you will be “shredding”. Skateboard decks are traditionally made of multiple plies of maple wood layered on one another (7 is the average) and this adds to their durability and strength. When beginning the search for a suitable skateboard deck, the width is an important overall characteristic. Different shapes and widths of decks are conducive to varying styles of skateboarding, but in the beginning choosing a deck width slightly narrower than the length of your foot is the best bet.
 


Widths 
The range of average skateboard widths (barring longboards, cruisers, or miniature boards) is from 7.5” to 8.5”.  Different styles of skateboarding correspond to certain general widths. Wider boards are more stable, but often more difficult for tricks. Narrower boards are usually more responsive and easier for tricks, but also less stable. 

Wheel base
The wheel base is the distance between your mounted trucks and varies based on your body type and personal preference. Like your “stance” in any other board sport, if you have longer legs, you’ll want a wider wheel base. The wheelbase determines the turning radius of the board; a shorter wheelbase will have a shorter turning radius and a longer wheelbase a bigger turning radius. 
 
Concave or Shape
Each manufacturer - and furthermore - various series of boards from vendors feature differing shapes or degrees of concavity. Concave is related to the amount of bending and shaping between the sides of the board, and can affect the ease of performing tricks in numerous ways. Flatter boards with less concave can be better for technical flip tricks, while boards offering increased concave are generally more solid and easy to control.
 
Trucks
The trucks attach the wheels to the deck and allow for turning and pivoting on the axle. The ease of pivoting on trucks can be adjusted. Tightening the nut on the kingpin compresses the bushings and creates a stiffer feel when turning. Looser trucks are better for turns while tighter trucks are better for pop. Changing the hardness or durometer of the bushings will also change how the trucks will pivot. Trucks come in different widths so it's important to know the size of your board before picking out trucks. 
 

 
Trucks are available in varying heights and each is better suited for various skateboarding styles and activities.  In general, there are LOW, MID, and HIGH truck styles.

Truck Heights

Low - Best suited for flip tricks and providing extra stability, this truck hieght goes well with smaller wheels to reduce chances of “wheel bite." This is also good for beginners because of the lower center of gravity

Mid - Best for skateboarding in the streets or at a park, but very versatile, this truck height is the most common for all-around skateboarding.

High - This height is utilized by skaters mainly interested in cruising or carving and those less focused on flip tricks. 
 
Size or Axle Width
Truck size is determined by the width in inches of the axle (shown in the diagram above).  In general, the size of the truck axle should be similar to the width of the skate deck. The majority of trucks are produced to be suitable for most 7.5” to 8” deck sizes.  

Bushings
Bushings are rubber pads between the kingpin and the hanger on a truck. There are 2 bushings per truck. Harder bushings are harder to turn on but return more energy giving a springier return to center or more resistance for pumping. Softer bushings absorb energy and impact making turning easier.
Tightening your trucks, via the kingpin nut, can change the way your board performs. 
 
Kingpin
The kingpin is the threaded bolt that holds the bushings to the truck hanger
 
 Wheels

The two main choices in skateboard wheels are diameter (in millimeters) and durometer (hardness).
 

 
Wheel Diameter
Wheel diameter, measured in millimeters, is usually printed on the outer surface of the wheel.  Different sizes of wheels lend themselves to different styles of skateboarding. The most common range for street and park skating is between 50mm and 60mm, while wheels larger than 60mm are usually used on longboards or cruisers. Smaller wheels (50mm to 54mm) are slower and more prone to getting caught on cracks or rocks, but are preferred by street or technical skaters due to less weight and increased ease for technical tricks. Larger wheels allow the skateboarder to go faster and avoid cracks, but increase weight.  Beginners should start with a wheel in the middle of the range, ~54-55 mm.
 
50-54 mm - Small and slow wheels, but preferred by street or technical skaters due to less weight and increased ease in flipping the board.
 
54-58 mm - Versatile, allow the skateboarder to ride in various conditions.  This is a good range for beginners that do not have a specific preference on wheel size.
 
>58 mm - Larger, faster wheels, but more practical for longboarding or cruising as tricks may be difficult to pull off due to weight and size.
 
Durometer 
Wheels also vary in their hardness.  Wheel durometer, or hardness, is generally rated on a scale called “Durometer A Scale” with hardness ratings from 1-100A, 100A being the hardest.  Soft wheels (< 88a) are great for skateboarding around rough surfaces, rolling over cracks and pebbles, and are often found on longboards or cruiser boards that need a lot of grip on concrete surfaces. They aren’t ideal for technical or street skateboarding, as the grip and softness reduces the ability to pop the board off the ground and perform tricks.
 
Softer Wheels ( <88a to 95a )  are great for skateboarding on rough surfaces, rolling over cracks and pebbles. They aren’t appropriate for technical or street skateboarding, as the grip and softness of the wheel reduces the ability to pop the board off the ground and perform tricks.
 
Harder Wheels ( 95a to 100a ) are most common for street or technical skateboarding. These wheels have less friction and ride faster. Wheels of this durometer are versatile and work well in the most common skating areas such as street, park, or vert.  
 
Some wheel hardness is measured in Durometer B; wheels using this scale tend to be a lot harder.  Refer to the durometer chart for conversion between Durometer A and Durometer B ratings.
 
Durometer Comparison Chart
A B
100 85
95 81
90 76
85 71
80 66
75 62

 
Bearings

 
Bearings are all manufactured in the same size which makes the process of buying bearings simpler - any bearing will fit any wheel.  Bearings fit inside the wheels and allow them to spin with less friction and greater speed. Differences in bearings include the quality of construction and the speed rating of the bearings themselves.  
 
Speed Rating or ABEC  
Bearings are rated on a speed scale called ABEC (Annular Bearing Engineer's Committee) factor, which classifies the speed of the bearing on a scale of 1,3,5,7, and 9. The higher the ABEC rating of a bearing, the less friction the bearing will experience and the faster the wheel will spin. Higher quality bearings will have sturdier construction, less friction, and often have a higher ABEC rating. Beginners don’t necessarily need more than an ABEC 3 or 5.
 
Maintenance: Bearing shields keep dirt from getting into the bearing and the ball bearings. Speed cream or lubricant keeps bearings smooth, clean and quiet. 
 
Hardware
 


Hardware is necessary to attach the truck assembly to the actual skateboard deck and comes in sets of 8 bolts and 8 nuts. The most common sizes of hardware are 7/8” (for use with no risers) and 1” (for 1/8” risers). These sizes of hardware should be sufficient to assemble most skateboard set-ups. If you're using riser pads with a height larger than 1/8”, then longer hardware sets may be required. Use a 3/8” socket size tool to change hardware.
 
Grip Tape
 
Grip tape is the adhesive sandpaper-like material applied to the top of the skateboard deck. Grip tape is necessary to ensure control and grip on the board for the skater. Most grip tape manufacturers make a standardized size and personal preference reigns supreme. You can choose whatever manufacturer or style that works best for you!
 
 Riser Pads

Riser pads are utilized to protect the skater from dreaded “wheel bite” (a nasty situation caused by your wheels contacting the deck of the skateboard and provoking a crash). Not everyone needs riser pads, and if you are rolling around on wheels less than 54mm or 55mm, you should be fine.  But riser pads add additional benefits, such as reduced stress on the skateboard deck by distributing pressure efficiently.
Those who ride pools or vert will definitely need riser pads.
 
Safety Equipment


Remember everyone, safety first, and second… and probably third. One of the most important parts of your skateboarding set up will be top-notch safety equipment including Helmets, Knee Pads, Elbow Pads, and Wrist Guards. Properly utilizing safety equipment and knowing how to fall correctly ensures a pain-free and prolonged skateboarding career.  
 

Blog

Burton

BURTON 2018 JACKETS, PANTS, GLOVES, THERMALS, SOCKS AVAILBLE NOW!!

We've just received a huge shipment of Burton 2018 Jackets, Pants, Thermals, Gloves and Socks. As usual the new Burton 2018 gear looks amazing and is great value for money!
 
If you're heading overseas for some Northern Hemi POW and need some new gear then now is the time to pick it up. Buy instore or online now!
 

Northern Hemi Sale

SNOW IS FALLING & RESORTS ARE OPENING IN THE NORTHERN HEMISPHERE!!!

We've had lots of deliveries of 2018 gear and the store is FULL of cool looking new stuff from Anon, AK, Burton, DC, Roxy, Volcom, Flux and Thirty Two.

Although it is heating up here in Australia it is cooling down in the Northern hemisphere and snow is starting to fall and resorts are starting to open for the season. To celebrate this we are having a "flash" Northern Hemi season starter snow sale this weekend. Now is the time to grab some new gear at a great price as we have a weekend of great deals on just about everything. We'll even have powderboards on sale (instore only) for as low as $300!!!

Even if you're not going away Xmas is not far away and who doesn't like getting snow gear stuff as a gift!

 
 

Instagram

Afterpay

 

Free Shipping 

Ski & Snowboarding Gear Shop Sydney

Since 2003, ESS Board Store in Parramatta has been supplying top quality snowboarding gear and skiing equipment for snow-lovers in Sydney. With a reputation as a snowboarding gear shop that not only stocks some of the top winter sport brands in the business, but for our awesome customer service and no-frills advice, we’ve become one of the most popular snowboarding shops Sydney has available.
+ Read More

The Best Online Store for Ski and Snowboard Gear

Whether you need advice on which snowboard to buy, or you need our expert help to fit your boots, you’ll find all the advice and information you need right here at ESS Board Store Parramatta. 

Whether you prefer to buy your snowboarding gear online, or you’d rather visit our shop on Church Street and see our fantastic range of products for yourself, you’ll be guaranteed a quality service from the passionate staff at ESS Store Parramatta. We live and breathe snowboarding, and love nothing better than talking to our customers about our passion. 

Why we’re the best place to buy your snowboarding gear

Plus, every item you see in our online store is available in our Parramatta snowboard shop, so you can see and feel it before you buy.  

And if you can’t find what you want in store, you’ll be happy to know that we’ll do our best to get it from one of our other snowboard stores in Sydney. 

Open 7 days a week for snowboard sales in Sydney

Drop into our snowboard store and see one of the best selections of snowboards Sydney has available. 

We stock rad boards from some of the best-known names in snowboarding, and we’re open 7 days a week, although we do take a break on bank holidays, 

Rent a snowboard from the best snowboard shop Sydney has available 

We understand that sometimes you just can’t afford to buy a board, or maybe you want to try the sport before you invest in equipment. 

That’s why we offer a rental scheme so that you can get the snowboarding gear Sydney snow sports enthusiasts prefer, without buying the equipment outright. 

We also offer Afterpay on all our products, so you can have the kind of snowboard Sydney snowboarders love, simply by paying in four equal instalments. 

Not just snowboarding and skiing but water skiing, wakeboarding and skateboarding too

While we’re known for providing a great selection of snow sports equipment, we also stock a superb selection of water skiing, wakeboarding and skateboarding gear too. 

Call into our store where you’ll find our enthusiastic team on hand with all the advice and information you need. 

Call in our Parramatta snowboarding shop or get in touch online

Take advantage of the best pre-season snowboard sale Sydney has available and call into our store today. Alternatively, if you have any questions, you can call us on 02 9683 3999 or email us at parramatta@essboardstore.com.au
- Read Less